Sir,
I may be missing something here, If the maximum propeller rpm is 2800
. A single rotor engine with max rpm of 1100 with 37 KW @ 8750 rpm.
With a reduction drive of 3:1 one could achieve maximum propeller rpm
of 2800.
Why can't this engine with low HP but with high rpm be used on the
Parsons auto gyro ( on YouTube
https://youtu.be/QOwb8QRHrMY )which is
currently using the 12a Mazda rotary or can it ?
Best Regards Zahid
37 KW is only 50 HP. A Mazda 12A 2 rotor makes at least 150 HP.
Gyro's, like everything else, fly on HP. It probably takes a minimum
of 110 HP to fly a man carrying gyro.
Paul Lamar
We just need a modern version of the Hiller Rotorcycle :
https://en.m.wikipedia.org/wiki/Hiller_YROE
50hp would be more than enough!
-Dan G.
Actually, it wouldn't, if you want the helicopter to do useful
things besides hover in ground effect at sea level. Paul's number of
110 hp for a single man carrying gyro is about right, and 150+ hp for
a single man carrying VTOL aircraft, 200 hp for a very light
two-seater like a Robinson R22. Yes, you can store a bit of energy to
make a jump takeoff in a gyroplane if you're lucky. The design
boffins at NASA Langley who are looking at all kinds of wild designs
come up with the same numbers. No avoiding the fact that if you want
to hover you need to produce as much thrust as it weighs, plus a
margin to allow for wind.
David Josephson
50 HP is the top power of the 294 cc per chamber Aixro kart engines,
liquid cooled housing, charge cooled rotor, however, this is a peak
power, not feasible for a sustained time, and no Wankel engine has an
FAA certification for aircraft use, few have a double spark/ignition
system system, that may be a minimum requirement for a safer airplane
use; glow plugs that would solve this issue are not available in the
market, and the producer of the engine in the light Canard
www.e-go.me warns that they sell only to this individual airplane
builder. Some other engine makers may be found, but it's not clear
at all if it are currently under production.
I've purchased an old KM-48 engine, fitted with a reduction gearbox
to move a concrete mixer, but with 10 HP it has little aviation
usefulness. 150 HP are close to the power of the early La Cierva
Autogyros, I can't imagine the reason why you may need 150 HP for a
Gyrocopter less than a 20% the weight of a full size Autogyro. I
asked in this forum about the reason for gyrocopters not having the
articulated blade roots that allowed first, autogyros, and then
helicopters to fly, but I don't remember any response, yes, latest
helicopters, starting by the Bolkow, had rigid rotors that left the
materials in the blades make the adjustment of pitch and incidence
that the articulated rotor had, but this is for helicopters, not for
autogyros/gyrocopters, and this is a RCE site, not an aviation one.
Does anybody offer for sale a single rotor engine, based in the Mazda
13B housings?
Thanks, have a nice season, best regards, + salut
Jose Gros-Aymerich
Alexander Schleicher has sold over 500 motor gliders with single rotor
50 HP or 56 HP
Austro Engines. The rotor is air cooled with an external blower. The
engine has no
recommended TBO. In other words it is intended to lasts forever.
It is FAA certified of course as otherwise AS would not be able to sell
it.
Austro also has a 2 rotor version of this engine that is FAA certified.
http://www.alexander-schleicher.de/en/flugzeuge/ask-21-mi/
Aixro have a prototype engine running with a pressurized oil system.
A oil cooled rotor will eventually be available. This will solve the
continuous
HP rating problem and make it just like the Mazda.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove you. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.