Paul, would using a CO2 bottle and spray bar be effective in cooling
the time to climb heat exchangers?
Ray Hellstrom
I never tried that. I assume it works better than a cold water spray.
We have a ten gallon tank and a 100 psi pump for intake water
injection and we planned to also use that for spraying cooling water
on the cross counter flow heat exchanger.
How much CO2 would we need for one minute and how much would it
weigh? The pressure tank sounds heavy.
Paul Lamar
Paul, I'm not sure how long it would run as I not up on the calculations
for the delta temperature would be but I see a five pound capacity
bottle weights eight pounds. There are 2.5 pound tanks but again not
knowing the amount needed I couldn't advise on it. CO2 is cheap and safe
unless punctured.
Ray Hellstrom
The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove you. ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.