Subject: I have never been able to design a PC board that worked from the get go.
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 8/4/2015, 4:36 PM
To: A10-me-earthlink



I have been doing it off and on since the early 70's starting with tape
and mylar.

Is this just me? :-)

Good thing I only populated it partially and tested it with a current
limited power supply! If I had connected it to a 12 volt car battery
 it would have melted the PC board and burned down the hangar!!

Paul Lamar



Not just you. I had a pro layout a pcb the size and shape of a half dollar coin.
All smt components. He got 2 IC's swapped. I recently laid out a 4"x6" pcb;
mostly smt. I got a 4 pin IC backwards. Murphy's law always applies.


Robert LeClercq


The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net <http://www.rotaryeng.net/>
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.