Subject: Oil Filter and fuel plumbing on the 650HP time to climb engine
From: paul lamar
Date: 8/4/2015, 6:25 AM
To: A10-Me-Earthlink


 It is kind of strange for Mazda to have the oil pump on the front of the
 engine  and feed the oil into the back of the engine. This started in 1968 and
 is the  same to this date. It complicates the external oil filter plumbing. Jim
 Medere  modified this system so oil is fed in at the back AND the front of the
 TTC engine.

 Paul Lamar


 Hi paul,
 I am sure you will have thought of it, but would using antifreeze in the
 total loss  water to cool the time to climb engine and dropping the water temp to
 just above its  freezing level give you a worthwhile cooling gain?

 Andrew Campbell


 We have been told by Jim Medere our warranty is void if we let it get
 above 180F :-)

He also told us not to use total loss. We considered it.  That was our
 first guess because it would  not need that much cold water.

 Paul Lamar


The motor mount tube bolted to the oil filter adaptor pad is suspect.
Several threaded holes in the adaptor plate another inch away could be a better choice.
Lynn E. Hanover

Tell me about it. The engineer that designed that poor excuse for a motor mount was
fired :-) We don't want to spend the time and money to redesign it and rebuild it.
There is going to be a Reno race style  safety cable around the engine in case it tries to  fall off.
There is probably enough AN hose to do the job as well :-)

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
 If you want off the list PLEASE let me know and I will
 remove  you.  ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2015 All world wide rights reserved.