Hello. I'am finishing my KR2 and I think rotary is the way to go.I want
to find out all I can on building a power plant in the 80 to 110 hp
range. I have a corvair and a VW but I dont like all the moving part's.
Has the 13b rotary been used on a KR2? Thanks for your help.
Don January
A 2 rotor with the stock cast iron end housings and gear box would be
320 pounds firewall forward and It would be 250 HP.
A cast iron end housings one rotor would be about 225 pounds FW
forward and would be 125 HP.
With expensive aluminium end housings you could get that weight
down to about 185 pounds FW forward.
Here is a gentlemen that has done a lot of work on all aluminium
one rotor engines.
SohnRichard Sohn
<res12@fairpoint.net>
http://www.fairpoint.net/~res12/html/one_rotor_wankel.html
Paul Lamar
My website has a new name, see
Richard Sohn
N2071U
http://www.rotarypragma.com
The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove you. ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.