Dear Mr Paul Lamar,

i've seen, that you are interested in ignition systems.

Perhaps the following SAE paper ist nice to read (unfortunately I do not have this paper ...): No 2015-01-0007 by Alberto Boretti et al, dated 2015-03-10 - quite new ... :-)

Hoping, the little information will help you


Yours sincerely

Frank Herfert

(Germany)

Thanks for the tip.

Paul Lamar


An Abstract is here:

http://profiles.sae.org/79718499737/

Rolf Pfeiffer

This is running on hydrogen. Hydrogen will ignite over a wide range of fuel air mixtures unlike gasoline. Therefore it is inapplicable to the real world. Show me results with gasoline. The world is now swimming in oil.

Paul Lamar


Not sure if hydrogen is that inapplicable, but that would be off-topic.
It seems to work with gasoline: http://www.mahle-powertrain.com/en/mahle-powertrain/mahle-powertrain-projects/turbulent-jet-ignition/

Poul Woefle

Unfortunately that will not work with a rotary as it extends down into the combustion
chamber.

As soon as I get back from Oz Poul I will send you a system.
I need a dwg of the front of your e-shaft to make a new trigger disk.

Paul Lamar




The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.