Hi Paul, could you send over your CNC machine programs/drawings of
the Rx8 water pump outlet block? I will forward it over to Randy and
get him to machine me one. Build up his arsenal of machined rotary
parts.

Matt Boiteau:



Sure will do. I designed an improved version. Somewhat simpler and a
little lighter.

You will need a pressure cap fitting from one of the car racing
outfits. It needs to be tig welded to the top when you tig weld on
the 90 degree pipe bends. It requires a lolly pop cuter to make.

The amount of R&D spent on this device is gigantic. :-) Thanks to
Mark Steitle and others for all the work they did on it.

It clears the P-port slide throttle.

Paul Lamar


Paul:

Is your new (improved and lighter) Rx8 water pump block available
yet?

Thanks and regards,


cozyflyr

Check with Randy Kempf

Randy Kempf <naa73x@yahoo.com>

He is the official manufacturing arm.

Paul Lamar



The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.