does anyone have a 13b with a micro tech ignition sys
i have one and i have tried just about everything i can
think of but iam still only getting 5000 rpm and only if
i advance the timing if i take the prop off of course
it will wind up to 9000 in a hurry the spark is good to
both rotors ive moved the timing in both directions only
to vary the rpm from 3000 to 5000 my a/f ratio i s from
12 to 13.5 down around 10 at idle i am not sure if its the
computer or the engine any ideas
bob obrian
What is the gear box ratio?
What is the prop diameter?
what kind of porting?
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove you. ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.