does anyone have a 13b with a micro tech ignition sys
i have one and i have tried just about everything i can
think of but iam still only getting 5000 rpm and only if
i advance the timing if i take the prop off of course
it will wind up to 9000 in a hurry the spark is good to
both rotors ive moved the timing in both directions only
to vary the rpm from 3000 to 5000 my a/f ratio i s from
12 to 13.5 down around 10 at idle i am not sure if its the
computer or the engine any ideas
bob obrian
What is the gear box ratio?
What is the prop diameter?
what kind of porting?
Paul Lamar
Sounds very much like an over propped situation I witnessed a few years ago.
A guy had a RV7 with the nicest rotary installation, technically and in
appearance I have ever seen. Everything looked right at first glance. It
had
the same symptoms you described. There were several rotary air planes at a
gathering. Everybody quickly agreed that the prop looked awfully big. It
was
decided to take the prop off a visiting rotary RV6 and put it on the RV7. I
have never seen a person so happy.
The prop came from a well known company. The RV7 owner provided all the
right information, and they still did not get it right. I believe he
finally
got the right prop.
There is just no guaranty.
Good luck
Richard Sohn
N2071U
http://www.rotarypragma.com
The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove you. ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.