Paul, Has Randy Kempf let you know about his new welded "P" port
method ??......He is doing a pair for my 13BREW.........


-- Kelly Troyer Dyke Delta_"Eventually" 13BREW_RD1C_EC2_EM2

Listen Kelly, where have you been all these years? :-) I know you
have been on the news letter for a long long time.

Mark Steitle and I came up with that idea 5 years ago.

My youtube video on the subject has 150,544 hits. That is an
extraordinary number of hits for a rotary video. Uploaded on Jan 10th
2010.

http://tinyurl.com/beqqxas


I asked Randy to start offering that service.



Paul Lamar


Paul,
 The latest method eliminates the outer aluminum plates to seal
coolant.......Randy uses a press fit
aluminum sleeve over the stainless insert......Welds the stainless insert
as to your method.......Then
welds the aluminum sleeve to the outer housing to seal coolant instead of
the "O" ringed plates......

 .His x Navy machinist says this method was used in many
stainless/aluminum connections on the
F-14 fighters he worked on........

Kelly Troyer

First I heard about it.

Sounds good. Hope it works.

It is not on his web site.

http://www.rotarpower.com/#!

Do you have any pictures?

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.