Subject: Free Rhino 3D sort of
From: paul lamar
Date: 9/30/2015, 10:58 PM
To: A10-Me-Earthlink


If you have a free Linux OS on your computer you can get free 3D
modelling software. 3D modelling lets you design your engine
installation to make sure all the parts fit under the cowl. 3D
modelling is what Boeing and Airbus use to design their air planes. I
have been using expensive Rhino software for years that runs on
Windows. It can also be used to design things like water pumps and
gear boxes.

It is a pain in the butt to take 2 notebooks with me when I travel.
One Windows and one Linux. Yes I know there are dual boot systems. I
feel they are too problematic for my use. I have been looking for
free 3D software that runs on Linux.

I would like to do away with Windows as it is too costly to
maintain. If your computer mother board or hard disk fails you have
to buy a new $100 windows OS from Microsoft to install it on the new
mother board. Linux OS is free.

The best thing I have come up so far is Linux Blender. The trick is
to put it in edit mode and then choose quad view under the view menu.
It then works like Rhino with 3 views, on the screen in four windows.
Top, front, right and perspective.

IMHO this is the easiest and quickest way to learn 3D software. You
draw your device in the old 2D way. Front, top and side views. It
then automatically appears in the perspective window.

I have a friend that teaches Rhino and Solid Works in college. His
students start having fun in Rhino in five minutes with Rhino. In
Solid Works it takes weeks.

More on Blender as I learn it.

https://www.blender.org/manual/modeling/meshes/introduction.html


Paul Lamar


I have blender too.


For Windows program. Just install your legal copy of Microsoft into
VirtualBox and run from inside Linux. If your computer dues,  reuse
it on another machine.

Henry


I was about to tell you the same thing, Paul.  By running Windows in
a virtual machine on top of Linux, you make it so Windows doesn’t
care about the hardware underneath.  From the outside, in Linux, you
see a single file that contains your Windows virtual machine and its
entire file system, so you can make multiple copies of that file and
keep one on a flash drive if you want.  You’ll never have to
reinstall Windows again, and the time you spend maintaining it goes
to nearly zero.

If your laptop dies, you just get another laptop and reinstall Linux
on it, and Windows has no idea you switched machines.

I used to keep a half-dozen Windows machines around for various
purposes.  I converted all of them to virtual machines and I keep
them all on my Mac.  When I run something Windows-specific, like
SolidWorks, I just bring up Windows, in a window or full screen, and
run it, and shut it down when I’m finished.

A lot of people put out various programs pre-installed in virtual
machines that you can just bring up without installing anything. Once
you try it, you’ll never go back.

Dave Klingler

Thanks Henry and Dave

Paul Lamar


Hey Paul,

I have to agree with these gentlemen.  It's awesome when Windows
crashes because all you have to do is close the application window
and start it up again.  You don't loose your connection to the
internet.  None of your applications running on your desktop outside
of Windows even know that Windows has died.  Windows goes down but
your computer keeps running.

One drawback is a performance hit specifically with graphics
intensive programs like AutoCAD and Rhino.  The graphics may not be
supported or may run painfully slow.  Your mileage may vary depending
on many factors not limited to memory shared with the Windows VM,
graphics hardware installed on your host computer, CPU capacity and
number of cores, and the specific type of VM you install Windows in.
There are several versions of VM available not limited to KVM,
Win4Lin, and Virtual Box just to name three that I have used at one
time or another.

Mark LaPierre

Mark I have a question. Does Linux handle quad core processors
differently than dual core processors or is that done in the BIOS?

Pual Lamar


Apologies for answering a question meant for Mark, but I’ll jump in.  The short answer is “no”.  The kernel divides up tasks and threads and assigns them according to whichever processor has the lowest workload.  For small numbers of cores it doesn’t handle cores differently depending on their number.

As an example, I have an old mid-2010 MacBook (the white plastic kind) with a 2.4 GHz cpu and a GeForce 320M graphics processor, both really slow by modern standards.  One of the nifty secrets of this particular model is that it will take up to 16 gigs of memory.  I have 8, and I’m planning to expand it to 16 now that the price is reasonable.  Memory is the largest single factor that will allow a machine to run lots of computer operating systems simultaneously.

My old laptop runs two or three Windows XP virtual machines handily, although I rarely do so.  It runs SolidWorks smoothly with Windows XP in a virtual machine.  I use VMWare, but if I were running Linux I’d probably be using VirtualBox.  By the way, I do sometimes run Windows and Linux simultaneously on top of MacOS, and I also have a Windows 7 virtual machine that I usually forget is there.

Dave Klinger

Thanks Dave. Looks like I will have to reinstall Linux as I have
upgraded the processor with a quad.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.