These are the liquid cooled heads for the jabiru. I am amazed
somebody has not done this for the VW engine. There are thousands of
VW engines used in small experimental aircraft not to mention dune
buggies. It would be a very profitable biz.
The exhaust valve failures are the main drawback to the VW engine.
The cylinders are too close together to get adequate sized air
cooling fins.
Paul Lamar
It's called a Subaru/Porsche isn't it?
Tim Vickers
Years ago Rotorway offered an engine that was part VW, Part Porsche,
part of their own design. wasn't it with water-cooled heads? What
happened? They disappeared.
John HedBlom
They are still around.
http://www.rotorway.com/explore-rotorway/history/
Harold Lunt
Do you know why is it not used liquid cooled heads in air VW engines
adapted for flight?
When it comes to cool heads with water, it is not only new heads to be
added to the engine, has water pump, belt more or adaptation of existing,
water radiator, change in the engine nacelle and will still continue
cooling air in the cylinders. The performance gain with water cooling is
not worth the increased complexity.
The current engine cooling can be optimized with the use of the lubricant
oil itself. Just increasing the flow of oil which bathes the springs and
valve stem to remove heat where it has more problem failure. With slightly
higher oil radiator can be improved cooling assembly without increasing the
complexity of what is already done. Kawasaki has done this in motorcycle
engines. Not to mention optimization of combustion chambers and better
control of gas flow.
Sergio Oliveira
Mooney tried that on an aircraft engine. I don't know how well it
worked. If it was effective I think all air cooled air craft engines
would now
have it as there were few draw backs.
The reason the FAA requires
an annual compression test is to detect exhaust valves that are about
to fail. I average about 500 hours on an exhaust valves in my
O-470 in my Cessna 182. Joe Horvath of RevMaster suggest
every 25 hours on a VW engine.
The case of Jabiru one has no choice as the Australian government
stepped in preventing the use of Jabiru engines in some circumstances.
Bottom line is Rotax has the majority of the 100 HP category market with
water cooled heads. That should be reason enough for all others
in that market to adopt water cooled heads.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove you. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.