Subject: Charged cooled Wankel supercharging
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 11/4/2015, 8:54 AM
To: A10-me-earthlink
CC: Poul Henrik Woelfle AIXRO <ph.woelfle@woelfle-engineering.com>



The liquid cooled Mazda proved to stand turbocharging up to very high boost level.

For a Stol type application, I need a very light weight 100 HP gas generator and I try to study the possibility to use a 294 cm3 AIXRO engine to do the work. That would mean more tha doubling the power of the original AIXRO.

The wankel engine would power a supercharger (Procharger C2) to compress air.
1 part of the air would be cooled through an intercooler to feed the Aixro

The other uncooled part added to the exhaust of the Aixro (in order to make a comparable back pressure and to use the heat to expand the air flow) would be used by the application.

Up to what sort of boost pressure do you think this little engine could stand before melting ?



Philippe Dejean.... (from France)

The problem with the AIXRO is; it is charged cooled.
It would not cool adequately turbo charged.

They have a oil pressure  pump for the bearings  on a natural gas version but the rotor
is still not oil cooled. I am working on them to convert the nat gas version to oil
cooled rotor :)

You would be better off now with a one rotor Mazda.


Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.