Subject: Exhaust flange drawing, Renesis
From: paul lamar
Date: 11/5/2015, 10:55 PM
To: A10-Me-Earthlink


Paul, do you have any Rhino drawings of the Renesis exhaust flange.

Is it practical to make a 'hatch type' exhaust flange for the
Renesis, http://www.rotaryeng.net/exhaust-joint-3D.jpg in order to
avoid welding the primaries to the flange and any potential cracking
at these welds.

I’m considering cutting preformed tubing bends and joining most pipes
with slip joints from burns stainless, rather than direct welds for
better flexibility, considering the length of the coax muffler.

http://www.burnsstainless.com/dsa-2.aspx

Alex Molteno


Yes a Hatch type flange would be good.

I think Mazdatrix sells RX8 exhaust flanges. Here is a picture.

I don't have a dwg yet.

Paul Lamar



Paul,

 Interested in the rationale behind the exhaust flange cad drawin by Bill
Jepson in the previous post..............

Kelly Troyer

Saves weight and is stiffer.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove  you.  ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.