Subject: LSA one rotor water pump
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 11/7/2015, 12:25 PM
To: A10-me-earthlink



 I think we can incorporate the water pump housing in the front end
 housing. A while back we cast up some stand alone water pump housing
 for the stock Mazda water pump cartridges. They worked great. We can
 use the stock low cost cartridge here as well. All aluminium
 versions are available  for the second gen RX7 engines.

 Here are some 3D's of what I have in mind and some old pictures. A
 lot more work to do on the dwgs.

 Paul Lamar


 I really like the ideal of the integral pump housing, its one less
 seal = 1 less leak area.

Dan Gorsline.

Unfortunately it adds a lot to the cost in terms of material
and machining time.

This idea came later.
With the input to the pump outside the end housing it is a lot
more efficient than the RX8 scheme.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.