Remember these are not final. You will have to do further work on
them. Also double check all dimensions.

Once unzipped they should import into Solid Works.


Paul Lamar


Thanks, Paul.  What shall I tell him for material?

Dave

6061 T6 is fine.

Paul Lamar


I haven’t yet had time to look at them, but I forwarded them to my friend for a ballpark estimate.  He works for a friend who has a machining and fabrication shop in Illinois.  They do a lot of work for Caterpillar, so they have a big laser cutter and various other tools that smaller shops wouldn’t necessarily have.

Dave Klingler


The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove  you.  ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.