The ultimate solution to this problem is a bit of intake manifold data
acquisition.
Get a $57 Maximite and set it up as data gathering system.
It has ten analog to digital input pins.
These will work with six pressure sensors one on each RX8 intake
runner. Drill and tap for a 1/16th NPT to hose barb fittings.
These are the same pressure sensors Tracy used. They
have a 1000 cycles per second response time.
You can store the data on the 64GIG SD card. The Maximite treats it
like a disk partition just like DOS. Attached is some data I took on a
P-port engine.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove you. ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.