I would say only several inches of additional temporary intake
manifold pressure. These PC 12 volt cooling fans are mass produced and
cheap.
BTW the motors are wired in parallel. Each stage has it's own
DC motor. Each stage runs at a different RPM and draws current
depending on aerodynamic load.
Paul Lamar
LOL...good idea ;-)
For fuel cell-vehicles a turbo blower is used to feed the stack and
linearise the output.
Our device had 80 kW blowers about the size of your PC-coolers.
Now the unit has a new duty in a airliner air conditioning system.
When used in an in line arrangement with an exhaust-turbine it is a nice
turbo-compound set up.
Also possible to get rid of the throttle body, the manifold pressure
will be controlled by the electronics.
Claude Jaeggi Germany
The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove you. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserve