Subject: Axial flow electric supercharger
From: paul lamar
Date: 11/15/2015, 12:40 PM
To: A10-Me-Earthlink




I would say only several inches of additional temporary intake manifold pressure. These PC 12 volt cooling fans are mass produced and cheap.

BTW the motors are wired in parallel. Each stage has it's own DC motor. Each stage runs at a different  RPM and draws current depending on aerodynamic load.

Paul Lamar


LOL...good idea ;-)


For fuel cell-vehicles a turbo blower is used to feed the stack and linearise the output.

Our device  had 80 kW blowers about the size of your PC-coolers.
Now the unit has a new duty in a airliner air conditioning system.

When used in an in line arrangement with an exhaust-turbine it is a nice turbo-compound set up.

Also possible to get rid of the throttle body, the manifold pressure will be controlled by the electronics.


Claude Jaeggi  Germany

Best idea I have seen along those lines was a turbo charger compressor driven through a step up gearbox. Could be driven with an electric motor or take off pulley on the motor.
   Chris. Hoskins

That has a hit on the BSFC. Takes HP to compress air.
You can turn off the electric compressor when you don't need it.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.  ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas Copyright 1998-2015 All world wide rights reserve