Subject: Time to Climb 650HP engine water injection
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 11/24/2015, 10:34 AM
To: A10-me-earthlink

This uses the same brand and type 12 volt diaphragm
100 psi pump as the cooling spray bar pump.

The pressure gage is a check on the injection pressure as we need
90 psi to over come the 80 inches of mercury manifold
pressure and have the proper amount of water injection.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.