Subject: Time to Climb 650HP engine water injection
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 11/24/2015, 3:17 PM
To: A10-me-earthlink


   This uses the same brand and type 12 volt diaphragm
   100 psi pump as the cooling spray bar pump.

   The pressure gage is a check on the injection pressure as we need
   90 psi to over come the 80 inches of mercury manifold
   pressure and have the proper amount of water injection.

   Paul Lamar

Looks similar to the pump on ny chemical sprayer for the
acreage weeds.

Dale Davies



   The Rotary Engine News Letter. Powered by Linux.
   If you want off the list PLEASE let me know and I will
   remove  you.  ACRE NL web site. http://www.rotaryeng.net
   You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2015 All world wide rights reserved.