I am willing to bet Teflon coated silicon nitride apex seals
will work great. I think Teflon is up to the
temperature requirements.
The coefficient of friction between the seal and it's slot
is a major factor in Wankel engines. It might make
a true diesel possible with a low leaning angle.
The other thing that might work is a high pressure oil
feed to the bottom of the apex seal slot. If Mobile One
or turbine oil is in the crankcase. You might be able
to get rid of the apex seal springs.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove you. ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.