To capture screen images to PDF there are also many snipping and snag it
applications out there, many for free.
http://en.softonic.com/s/snipping-tool-software
http://download.cnet.com/s/snipping-tool/
for just two options.
MS Windows may even have it built in now. It's on my computer at
work but IT set it up so I don't know if it was included or added.
Tom? Bradley...ex mayor of LA ?? :-)
I assume those are windows programs. I went into Fry's and inquired about
some windows programs for sale and I asked them it it was necessary to
connect my windows computer to the internet for the program to work.
They said yes. All of them.
Microsoft and these windows software venders are the NSA of the computer
world ;-)
One must be insane to connect one's windows computer to the internet.
Running Linux for 16 years I have never had a virus.
All Linux programs are free for a couple of mouse clicks.
About 50,000 at last count. There are still one or two programs I keep
a Windows computer to run.
Paul Lamar
Well all my machine computers, and both my cad/cam computers and my
personal desktops at the shop
and at home are all running 64bit Vista in a highly modified form. I
really did not have much of
a choice since all the software I use: Mach3, Soild Works, MasterCam,
Rhino, all PCB design software
are all windows based.
I tried Ubuntu before, but there is just not enough software out there
to do what I need to do
to switch to Linux. LinuxCNC does not support most G-codes for canned
cycles either where Mach3
does.
Since I locked my wife out of all my work systems, and restricted her to
just her desktop and
laptop I have been virus free myself. The only virus attacks that
happened is when she was
using one of my computers instead of her own to do some graphics work or
cad work for school.
While on my computer she opened emails infected with Trojans and
infected my systems. I was
able to eradicate the viruses no problem, but it got her locked out of
my computers after
the third time.
Her computers are just fine, I built her a desktop identical to mine
with 6 core processor,
high end graphics and over 2tb hard drive with the system drive being
200gb SSD. Her laptop
is a 4 core high end too. She only used mine because it was convenient,
well that will not
happen anymore.
Any way I got a 7"lcd and a vga converter I will hook up on the Maximite
along with the
touch screen, I will modify the MMbasic code tonight and hopefully
tomorrow I will
get it back up and running with the new screen and start working on the
engine
analog gauge graphics. I plan on using a bitmap background with the
pointers or
bar's for the bar graphs being sprites and just moving those to show the
engine parameters
such as egt, rpms, temps and such.
If all that goes well then I will see about transposing my Arduino code
to MMbasic for
the ecu. As I had stated before in a email to you, the reason for
designing my basic engine
fuel injection driver and ignition driver is to have the ecu only send
the trigger signal to
them, and in the even of ecu failure the board will still work with
direct crank triggers to
keep the engine running.
I think the system will work fine.
David Jr.
The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove you. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.