So, rotors are usually for the RX-7 are cast iron? The housings are
aluminium with a thin layer of nickel for the wear surface?
Does anyone know what the Johnson or Sachs small snowmobile engines
used for their rotors and housing? I have been told by one person
that the rotors are cast iron too but the housings are just
aluminium.
Does anyone know if just plain aluminium housing are used? Any other
material used for rotors besides cast iron that works?
David Jr.
Yes the rotors are cast iron. Very tough and robust. The housing are
lined with hardened steel and then chrome plated.
There have been many different coatings applied to the aluminium with
out as much success as the Mazda housings. 2.5 million engines have
been sold.
Paul Lamar
Great pictures, thanks Paul. I would take as many of those production
pictures and such that you would like do send.
David Jr.
Here are a bunch more. We were the first round eyes to get a tour
through the factory :-) Took 18 months of cajoling.
Paul Lamar
Great pictures! I've been working on some investment casting (steel and
aluminum) using sterolithography to generate the wax molds. It appears
that the rotor would be an ideal part to make using that process. For
ones or twos, it is much cheaper than having to make a mold. If larger
quantities are needed, then they make a wax mold from the stereo model.
This method sure beats the old way of making patterns.
Gary Knutson
I made some intake patterns on the local college stero lith machine back
in 2003. In those days the stero lith machine cost $30,000.
Paul Lamar
Could the rotors be 3D printed from say Titanium or other materials at a
realistic cost? The weight of the rotor would be so reduced that RPM
could be increased. The printing would allow a design that would not be
practical or even possible with conventional machining or casting.
I think that NASA is able to print in different metals without the
conventional welding process.
Andrew Campbell.
As long as it can hold the tolerances to + or - .001 inch.
Paul Lamar
It would appear that the tolerances and surface finish of EBDM printing
are of a very high magnitude, the amount of material that can be
deposited in an hour is also high so hopefully costs may be acceptable.
Given the ultimate tensile strength of Titanium alloys being in the
region of 2 times cast iron and a lower SG and the ability to remove
most of the unwanted material within the rotor we could end up with a
%75 reduction in weight.
Titanium has poor thermal conductivity, this would help to keep the
rotor cool, the extra heat not absorbed into the rotor is going to have
to go somewhere though.
Would this reduction in rotor weight translate into a significant power
increase?
Andrew campbell
Only if you have a gear box to handle higher RPM.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove you. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.