I am looking for a very small and light turbo for a two stroke 300cc
and 600cc rotary project. I need it to be light, I know a
supercharger would take power from the engine butI also know that
most turbos are heavy or very expensive. I can make my own
supercharger from aluminum, but I am worried about the powerit will
take from the engine to compress enough air for the boost. Seems that
weight of the turbo and complexity of waste gate and all are one
evil,yet no hp taken from the engine for operation is a plus.

and that the hp required to run the supercharger is a evil,but very
simple ratio drive belt and  no waste gate assy is a plus.

Which one? advice and recommendations? David Jr.


You got me there. I recommend


"The Turbochargers" how-to book, written by Hugh Macinnes, will show
you how to select and install the correct turbocharger for big or
small horse-power gains. If you want more power, a turbo may be the
solution you are looking for and this book will definitely help you.

This book also covers turbo design, sizing and matching. Controls,
carburetion, exhaust, ignition, intercooling, marine and
high-altitude applications.

And unlike other DIY turbo guides, this one covers much more than
just car engines. You'll find information on truck, diesel,
motorcycle and marine applications, to name a few.

The /Turbochargers/ how-to guide is the most comprehensive
turbocharger book available, and you will also find information
related to turbo suppliers and kit-maker addresses.

If you want to turbocharge your motor, this is the guide you need!



Paul Lamar


Never tried it but it is small.

http://www.ecotrons.com/products/small_engine_rhb31_vz21_turbocharger/

 Matt Naiva

The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove  you.  ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.