Don't forget that a two stroke will pump almost double the air that
a four stroke engine will of the same declared displacement. Also
in that size range for the displacement, the turbo will be quite small.
No where near transport trucks or industrial equipment size and
weight. The center section is one area of mass but the other is the
turbine housing. If it was cast from titanium or made of Inconel sheet
the turbine housing would be much lighter and reducing an 8 pound
turbo by 2-3 pounds.

Dale Davies



How about this:
http://www.ebay.de/itm/401036119269?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Lutz Strobel


A two stroke rotary will not pump double the air compared to a 4 stroke rotary
the only difference is the air/fuel mixture will pass thru the bearings also
since there is not a oiling system, all the oil is in the fuel.

David Jr.



The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove  you.  ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.