Subject: New alloy to put turbo compound rotaries on the map
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 2/5/2016, 9:30 PM
To: A10-me-earthlink



       It is called MA 956.
       Since the rotary exhaust temperatures are up around
       1800 F it will be needed. One can always cool the exhaust
       before it goes to the turbine but that implies a loss
       of recovered energy.


       Paul Lamar

   Hi Paul & Steve
   Looks like engine rotors from this alloy would have to be CNC machined from solid billet or forgings.
   It is NOT a castable material (unless you are willing to lose the special high-temp qualities) :

   >From Special Metals - "INCOLOY® alloy MA956 (UNS S67956), first developed as an aerospace superalloy and now used in a range of industrial applications, combines excellent strength and fabricability with outstanding resistance to prolonged exposure up to 1300°C (2400°F). Its exceptional properties result from the mechanical alloying process by which it is made; a process which allows a fine distribution of yttrium oxide particles to be incorporated into a highly corrosion-resistant Fe-Cr-Al alloy"

   >From Matweb - "An iron-chromium-aluminum alloy that is oxide dispersion strengthened and produced by mechanical alloying"

   >From wiki - "Incoloy MA956 is made by a mechanical alloying <https://en.wikipedia.org/wiki/Mechanical_alloying> rather than a bulk-melting process"

   Cheers
   Paul Randal


How big of a billet would be needed to make some 12a sized rotors out of this material? I know it's overkill but I am curious.

Steve Ross

My guess is 12 inches in diameter.

Paul Lamar


      The Rotary Engine News Letter. Powered by Linux.
       If you want off the list PLEASE let me know and I will
       remove  you.  ACRE NL web site. http://www.rotaryeng.net
       You Tube http://tinyurl.com/beqqxas
       Copyright 1998-2016 All world wide rights reserved.