Subject: New alloy to put turbo compound rotaries on the map
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 2/6/2016, 12:49 PM
To: A10-me-earthlink



             It is called MA 956.
             Since the rotary exhaust temperatures are up around
             1800 F it will be needed. One can always cool the exhaust
             before it goes to the turbine but that implies a loss
             of recovered energy.


             Paul Lamar

         Hi Paul & Steve
         Looks like engine rotors from this alloy would have to be CNC machined from solid billet or forgings.
         It is NOT a castable material (unless you are willing to lose the special high-temp qualities) :

         >From Special Metals - "INCOLOY® alloy MA956 (UNS S67956), first developed as an aerospace superalloy and now used in a range of industrial applications, combines excellent strength and fabricability with outstanding resistance to prolonged exposure up to 1300°C (2400°F).
Its exceptional properties result from the mechanical alloying process by which it is made; a process which allows a fine distribution of yttrium oxide particles to be incorporated into a highly corrosion-resistant Fe-Cr-Al alloy"

         >From Matweb - "An iron-chromium-aluminum alloy that is oxide dispersion strengthened and produced by mechanical alloying"

         >From wiki - "Incoloy MA956 is made by a mechanical alloying <https://en.wikipedia.org/wiki/Mechanical_alloying> rather than a bulk-melting process"

         Cheers
         Paul Randal


     How big of a billet would be needed to make some 12a sized rotors out of this material? I know it's overkill but I am curious.

     Steve Ross

     My guess is 12 inches in diameter.

     Paul Lamar


Weight or density is the problem. There is no advantage over the stock rotors.
Titanium or titanium aluminide rotors would cut the rotor weight in almost 1/2.
If you build a larger rotary engine such as the R130 or the new 16X the rotor weight is even more. Manufacturing the rotors from TiAl would have a pronounced effect on the weight. I am not certain about the heat transfer of TiAl but being 50% aluminum it should be similar or higher than the cast iron rotors. A titanium rotor would save weight and have low heat transfer similar to SS which could provide an ideal rotor material other than cost.
That should start coming down as it is used more in aerospace and racing.

Dale Davies


See attached data sheet for available sizes. May not be available in sizes large enough to make rotors.
Larry Childs


            The Rotary Engine News Letter. Powered by Linux.
             If you want off the list PLEASE let me know and I will
             remove  you.  ACRE NL web site. http://www.rotaryeng.net
             You Tube http://tinyurl.com/beqqxas
             Copyright 1998-2016 All world wide rights reserved.