Subject: Turbo-side-Time to Climb 650 HP
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 2/8/2016, 1:01 PM
To: A10-me-earthlink


Jim Mederer used a interesting technique to tune the turbo for
aircraft use. Most turbos are designed for automotive use where
fast spool up is necessary. The probelm with this is at high
continuous aircraft power the turbine will over heat and or  over
speed and fail.

What Jim did was use a controlled leak in the exhaust manifold to
get just enough boost.

Works better than a waste gate with low A/R turbos.

This has a side benefit of reducing the exhaust back pressure. Less
back pressure more power.

Paul Lamar

Hi Paul. I don’t understand! I thought a waist gate was a controlled
leak in the exhaust manifold.

Steve Izett

Yes it is but it is a bit heavy and problematic.
This  is much simpler and and lighter weight.

The waste gate only measures the back pressure.
This device respons to the ratio of back pressure to atmosperica pressure.
I think it does a better job of keeping the HP matched to the altitude change.

Of course the jury is still out until we fly it.


Paul Lamar


The Rotary Engine News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.