Subject: Turbo-side-Time to Climb 650 HP
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 2/12/2016, 10:38 PM
To: A10-me-earthlink




    I forgot to mention the Bell is 3:1.

    The Allison version will be in the same ball park.

    BTW rumour has it the new RXx will be 3.2 litres equivalent so at
    the same level of tune as the current 13B  TTC engine we are looking
    at 800 HP for a two rotor. It is all aluminium stock as well.


    Paul Lamar


    Paul, you might look at the gear set from a NP241 transfer case,
    it's very beefy and it doesn't have a lot of crap attached to it.
    Ratio is 2.72:1.

    Everett Rankin

    How much torque is it good for?

    Paul Lamar


   Supposedly 5500 lb-ft, like I said, it's beefy;)



http://www.genuinegmparts.com/pdf/powertrain/GM%20Parts%20Remanufactured%20Transfer%20Case%20Specification%20Chart.pdf

   Everett Rankin


   I doubt that. I think you mean 550 ft pounds.
   The ratio is too low for rotary use. We need 3;1 minimum.

   The Ford is good for 650 ft pounds and is used in the power stroke
   diesel. It is also 3.12 to one.


   Paul Lamar

The chart reads 5000 lb ft. The input to the transfer case is the engine
torque x torque converter x first gear ratio. The other thought with
regard to this is the fact that low range used in a transfer case is
designed only for short term intermittent use.
When you go to the Allison MD 3060 transmission, the first gear is
designed for 900 lb ft input torque and use in cement mixers etc. for
use around town. Heavy loads and lots of red lights. In the specifications
there is a maximum RPM input listed. That more pertains to the torque
converter than to any other component. An advantage to the Allisons
is that many of the planet carriers are rebuildable with planet gear kits.
If they survive construction sites in trucks and other equipment in mud and
God only knows what else, they will work real well as an aircraft PSRU.

Dale Davies

Must be for some sort of truck. The weight is 75 to 100 pounds. Totally
out of the ball park for our applications. The Ford planet set weighs 8 pounds.

The complete Bell 47 Gear box is only about 45 pounds. About the same as a Tracy.
And that is a monster planetary.

Paul Lamar

It came in lots of 90's pickup trucks, not necessarily heavy duty ones.  That weight is for the whole transfer case, I don't know the weight of the gears but it'd have to be less than the Bell47.  I thought about input RPM issue but the big diesels usually connected to the Allisons redline at around 3000RPM which is the maximum RPM the planetary input would ever see.  A pickup truck with a gas V8 on the other hand could see transfer case inputs of 5000RPM+ if it was used hard (transmission in top gear, 1:1).  It might actually be better.  I'm not trying to rubbish your plans Paul, I'm just sayng that there are lot of interesting planetaries in transfer cases.

 Everett Rankin

Let me know if you find any that are over 3:1.
Also the Ford set are less than $200.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove  you.  ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.