Subject: The amazing Time To Climb Mazda rotary engine.
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 2/19/2016, 5:40 PM
To: A10-me-earthlink


I just found out what a Formula One engine weighs. 145 KG or 319
pounds.  The Formula One engine is the zenith of piston engine
technology and cost no object. It is less HP than the time to climb
engine as the basic engine only puts out 600 HP.

The Formula One engine cost up to 100 million dollars and is  1.5
times the 200 pound weight of our TTC engine. You can get a new RX8
engine from your Mazda dealer for less  than $10,000.


BTW one can use a generator on the turbo and an electric motor on
the prop shaft for an all electric aircraft turbo compound
configuration. There is an efficiency hit of about 10 to 15% due to
the efficiencies of the generator and motor. Also a weight penalty
due to the weight of these parts. Saves the cost of a turbine gear
box however.

I guess this would be a 10 to 20% reduction in fuel burn. With a
turbine gear box it would be more like 30%.

Paul Lamar


That is the culmination of 200+ years of reciprocating engine development.
And how many and much aerospace alloys are used to get reliability and
low mass? The new engines have to last a couple of races. Ten years ago
they would blow up if they had to run another 30 minutes. That requires
a lot of R&D along with expensive materials.
With the amount of time and money invested into the reciprocating piston
engine applied to the rotary, who knows where it will be. Maybe we could
get them to run in space:-)).


Dale Davies


The Rotary Engine News Letter. Powered by Linux. If you want off the
list PLEASE let me know and I will remove  you.  ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.