If you know of anybody into 4 wheel drive and they happen to have a
 Chrysler Rock Trac 4.1 transfer case apart I need a cell phone
 picture of just the planet carrier.

 I have tried just about everybody and every thing here in SoCal. No
 luck so far. Some of the catalogue pictures are wrong like this one.
 Apparently Chrysler uses generic part pictures and not actual part
 pictures.

 Paul Lamar


Paul, maybe call JB Conversions 337-625-2379

Lots of data about the older New Process 241J and the current NVG241OR
(as used in Rubicons) which have 4:1.

There is also a conversion kit that replaces the front half of the case
with a 5 pinion 4:1 set
http://www.quadratec.com/products/52254_101_07.htm


David Josephson


Bingo David!!

SO that's how they do it!!!!

EXACTLY what I was looking for.

Now I got to go see how big it is.

It looks perfect. It even has a prop shaft spline. Essentially double planetary's
but lighter in weight than two separate planetary's.

I don't see the ring gears so they must be built into the housing.
No problem.... we will just cut away what we don't need.

Thanks a bunch for this David. This is THE key to the Reno Racer.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.