Subject: Eddy currents in non ferrous materials
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 3/27/2016, 8:37 PM
To: A10-me-earthlink


Paul, Every time I go to a hot rod or experimental aircraft show, I
am invariably impressed with the clever thought and ingenuity. I had
that feeling again when I came across this "battery replacement"
proposal.
http://techcrunch.com/2011/06/14/rethinking-the-battery-clarian/
Grant Johnson


If it rotates like a Wankel, sounds like a Wankel and smells like a
Wankel it is a Wankel. I am surprised the patent office is so stupid
that they gave them a patent on it.

A Wankel by any other name is still a Wankel :-)

Of course it stores more energy per pound than batteries as liquid
hydro carbons are almost unbeatable in that regard. The only thing
that comes close is rubber bands. These are pictures of the Rubber
Bandit. Never flown.

Paul Lamar


The patent has been applied for, not issued. It's a Wankel with a
generator integrated into the housing, or the eccentric.

David Josephson

Maybe the rotor is a magnet. That might work with aluminium end
housings.

I say might because aluminium has magnet properties.

If you have a pendulum with an aluminium disk and you have a magnet
with a slot in it at the bottom of the swing. In other words at Six
o’clock. Now drop the pendulum from three  O-clock and it will stop
at six o’clock. Now cut slots in the disk and it will go right
through the magnet and back and fourth.

I suppose they have tested this device and they are not affected by
magnetic properties of aluminium. Maybe non magnetic SS will work for
the end housings.

Maybe the e-shaft is magnetic and there is an armature  section
outside the engine proper. No different than connecting a generator
or alternator in line.

Cooling the side housings would be a challenge with a magnetic
rotor.

Interesting idea if it works. I wonder what size it is.

The small Wankel engine is not a problem as many Wankel model
airplane engines have been built and sold. They are usually rather
expensive. There is one on Ebay for $410. The Nitto engine is
slightly over one HP or 934 watts at 17,000 RPM. Trouble is it runs
on model airplane fuel with a glow plug. I'll wager it is LOUD!!!
:-)

Paul Lamar


I'm not a physicist, however, I do understand eddy currents in non
ferrous materials like aluminium and copper.  If slots are cut into the
aluminium disk, aren't the eddy currents greatly reduced or prevented
from being generated and thus the disk will not stop from the
interaction of the eddy currents and the permanent magnet?

Norman DeBoer


The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.