Paul,  I am thinking of getting an alloy spacer made to finalise my flexdrive.  It has to bolt onto the 6 bolts that hold the flexplate to the E shaft (or is that 8 bolts?)   So it has to be a circular plate (spacer) that is approx 30mm high which then holds my cushion drive up from the flexplate by that distance.  Probably gotten everyone confused by now, but the question is who can do this drawing for me so it can be fed into a CNC mill.  My mates here are too busy at the moment and could take up to 6 weeks then  the wait to get it done.  It is very basic, and uncomplicated, so to speed things up I am looking elsewhere at the moment.

Neil Unger

Make a pencil and paper sketch and scan it as a jpg.
Send it to me as I have the bolt circle diameter on those six bolts
that go in the rear counter weight and I can make an IGES you
can send to the machine shop. Send me a picture of the rubber
coupling your using as well. While you are at it buy Rhino. Once
you get used to it you will wonder how you ever got along
with out it :-)

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.