Subject: Power = take off ?
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 3/30/2016, 9:44 PM
To: A10-me-earthlink


Hi ,

I am planning on building a canard either the VARIEZE or LONG-EZ
because I would like to build an aircraft to travel long distances.

One of the drawbacks of a canard is that it requires a long runway
for take off.

There is a canard called the IBIS Canard a wooden structure using a
direct drive air cooled VW 65 HP. His thinking behind it is that the
maximum rpm for propeller is 2700 so as the engine idles @ 1000 rpm
he reached Max propeller rpm @ 3700. He even says 85 HP would cause
extra fuel consumption.

https://www.junqua-aircraft.com/html/framegene.htm

I was wondering by having an increased HP with reduction drive and
relevant propeller, Can one dramatically shorten the take off
distance of a CANARD like the VARIEZE or LONG-EZ ?

Zahid Rahman

Sure! all it takes in HP. Go see Emon Hurley at Hurley Engineering
in Coventry and get him to build a P-port two rotor with 250 HP and
install it in a Long EZ.

If the prop is 50% efficent at 50 feet per second forward speed you
will have  HP = 125 = 68750  pound feet per second.

So at 50 feet per second you have  1,375 pounds of thrust. That is
just about what a Long EZ weighs so basically the airplane will
accelerate initially at well over  one G. One G is 32 feet per
second per second.

You will be doing about 80 MPH in about 3 seconds. and a couple of
hundred feet down the runway.

65 HP would barely make it fly.

With a p-port rotary it would do well over 200 MPH.

Paul Lamar

Hey Zahid,

I too am building a long EZ, actually I have two, and I bought a
rebuilt 13B out of a mazda to use. I am convinced Paul is right. Much
more HP and a smaller package. Keep us posted on your progress. This
is all new territory for me so I can use all the help I can find. A
friend has a bush plane that is fun to fly but you can’t get any
where with it as it is too slow. My wife and I love to frequent the
Moab Utah area… 1000 miles away, 2 days drive, but with a near 200
mph plane its only 5+ hours. I think I live on the edge of the
planet, I don’t know of anybody out here that has experience with
converting a rotary to aircraft use. I’m wondering… where is
Coventry? I bet its on the east coast. Is there anybody out here in
the Pacific northwest that knows their stuff? Specifically the Oregon
coast?

Regards Jess Choat.

This one has been flying for over 600 hours. Owned and built by Perry
Mick. The engine is solidly bolted into the air frame. It also has a
stock RX7 instrument panel. I uses a stock RX7 ECU.

Paul Lamar

Coventry (UK) is 99 miles from me and  5,500 miles from you. I Would
like use it to travel 3200 miles east of UK. Thanks for confirming a
two day travel. Thanks for the pics.

Zahid Rahman



Just to be clear and avoid misunderstanding by me.

The designer of wooden IBIS canard  with EMPTY weight of 250 kgs (550 lbs)
is claiming to achieve flight with Direct Drive on VW 60HP.  MAX. 2700
Propeller RPM @ 3700 engine RPM.

I know a builder is going to use on the  (wooden) canard  VW 80 HP air
cooled,  so @ 3700 RPM it will be utilising 65 HP from the 80 HP.


Can I achieve the figures you suggested (above)  on LONG-EZ EMPTY weight
322 kgs (709 lbs) with  P-PORTED  250 HP rotary with Direct Drive ?

Zahid Rahman

Direct drive means no gear box. If the engine is turning 3700 RPM
so is the prop. A 3700 RPM prop is very inefficient indeed.

No! All rotaries require gear boxes. Rotaries make power with RPM
and not displacement. That is one of the reasons they can be
so light in weight. The prop must turn below 2700 RPM for efficiency.

A 60 HP airplane is not really suitable for 3200 mile cross country trips.
If you get a head wind you can drive faster. About 150 MPH
is needed for a reasonable cross country airplane. Of course
a few cross country flights have been done with less.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.