Subject: If we do our own billet end housings
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 4/4/2016, 1:45 PM
To: A10-me-earthlink


New structure for the rotary' We might as well fix the 3 rotor and 4
rotor e-shaft cost problem and make the block like an Offenhauser.
One of the strongest engines ever made. It still holds the record
for HP per cubic inch.

Basically a main bearing clamp is inserted into the centre housings
and the e-shaft is one piece.

This puts a centre main into a two rotor as well.

Paul Lamar

Hi Paul,
I remember Abe Ibarra extracting well over 1000 HP from his 2 rotor drag car, so I question the need for us to insert the extra main bearings. Is there history of Mazda 13bs or Renaissance engines needing the extra mains?
Having asked the question, did that engineer in UK, name of Hurley I think, install extra mains in his 4 rotor engine?

Dave in Perth

ps. I love the name Oz-Kosh!

Well people that build those high power engines machine the rotors
to handle  the tilting that occurs when the e-shaft bends lightly.
It is  not a psroplem for most engines likely to be use in an aircraft.

My main desire is to make the e-shaft cheaper to make for 3 and 4
rotor engines. The current shafts need to be precisely machined as they
are held together with tapers and tension bolts.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.