Latest news from e-Go aeroplanes View this email in your browser
http://www.e-goaeroplanes.com/
Our first production aircraft is being wrapped up! Not only is this
aircraft (G-OEGO) nearing completion, it is literally having a finish
applied by wrapping it in a high gloss white vinyl. The vinyl looks very
smart and, if necessary, can be replaced after a number of years without
adding to the aircraft weight.
Main wing Fin and rudder parts Work continues apace on the manufacture
and assembly of parts for G-OEGO and our first customer is looking
forward to the hand over.
We are already planning a number of shows and fly-ins where people will
be able to see both the prototype G-EFUN and the new aircraft. We are
confirmed participants at AeroExpo 2016 at Sywell in Northamptonshire
and will have not only G-OEGO on the stand but also G-EFUN in the flying
display.
You can see e-Go flying through a champagne cloud below... As most of
you are aware Adrian Hillcoat left us in December and we are currently
recruiting a new CEO. We have also expanded the board, with Keith
Dennison (our Chief Test Pilot) joining as observer whilst Terry
Holloway (MD of Cambridge Aero Club) becomes a director in place of
Robert Marshall and Paul Hendry-Smith (CEO of The Light Aircraft
Company) joins as a director.
We welcome their views and experience. Just in case you missed it, we
gained good coverage in two publications recently who wrote about our
progress to date. Both Flyer Magazine and the LAA Magazine wrote
comprehensive, multi-page, well-illustrated articles about us and if you
want to catch up with these do take a look at them on our web-site.
Flyer Magazine LAA Magazine
robert pay
Robert, 40 HP or even 60 HP is not going to be enough.
I suggest a small turbo charger. That way you will have
a higher cruise speed at 12,000 feet. The Wankel is very
robust as long as it is cooled properly.
Your cooling system leaves something to be desired
in that regard.
If you don't have my book How To Cool Your Wankel
Get a copy of Compact Heat Exchangers. W.M. Kays and A. L. London
Kreiger Publishing
Company. Malabar Florida. 1998 ISBN 1-57524-060-2 From Foyles in
down town London.
Foyles is the best technical book store I have ever had the pleasure of
visiting.
Paul Lamar
Paul, Does this engine have a pressure oil system (with sump)
??.......It appears that the bearings are lubedby a cool oil/air mist
(is this charge air cooling of the rotor also ??).........The rotor
housings apparentlyare then cooled by a water-pump/coolent/radiator
system (is that correct??)
Kelly Troyer
I doubt it.
If that is the case it will have trouble generating HP continuously.
However it must be able to that at some lower level as it is a drone
engine.
Paul Lamar
Hi Paul,
They are using a charge-cooled engine and maximum continuous power is
going to be limited due to heat rejection. The block is liquid-cooled
The engine manufacturer is a question. Apparently the Woefle engine from
Germany is the base unit with British mods. To the best of my knowledge
this
engine does not have a separate means of cooling the rotor or use the
high-temperature
mods used in an RPV variant of the engine. The engine manufacturer has
limited sales of this engine to E-GO only which lead to a suspicion that
this
is a trial market and the E-GO ends up being the long term in-flight testing
for the engine. I'm a little surprised that they didn't go with the
certified
AE-50 R, but perhaps the price of the engine was a problem. The AE does
have an air-cooled rotor and a track record.
best,
George Wright
The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove you. ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.