Paul,  Sorry for the confusion, but I realised last night that the
counterweight is what I want to attach to.  All the spacer does is
hold my flex coupling attachment plate up 20mm from the counterweight
so that the plate is centered on the 50mm flexcoupling. Hopefully it
is clearer now??  The ring will center on the boss on the
counterweight, and in turn will center my flex coupling  plate.

Neil.

Somehow this got sent out with out my comments.

Do you have a jpg of your flex coupling?

Paul Lamar



Paul,  No I do not,  It was water cut and the OD is 130mm.  The holes
were water cut as well.  Come to think of it that mob should have the
dimensions to do the spacer as well.  Will investigate.

Neil.

I take it there are two plates with some sort of rubber bushing
between them.  Is that correct?  In that case a little bit of axial misalignment
may not hurt.

Paul Lamar



The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.