This is the same story all the time with EFI. One can spend years
sorting it all out. For most aircraft use carbs are the answer.
Paul Lamar
Hi Paul,
I plan to use two of these TBIs on the RX8 - two 48s are good for 500HP.
I use one on my Funk/R2800 at present with good results.
Attached is the brochure from Rotec
Rs,
Dave in OZ
That is not injection. The low pressure air behind the perforated tube draws
the fuel out of the tube.
It is a copy of the Ellison carb. The patent on the Ellison has expired.
Hundreds had been sold long before Rotec started making it.
It does work very well. But not much better than any old carb.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove you. ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.