We hired Nils Castillo, a local Motec dealer, to
wire the TTC aircraft. Nils had extensive experience
wiring off road racers with the Motec systems.

What we did not realize was the wiring pin numbers
were stored in the M800 memory. We wasted a couple
of months because we did not know that. Jim Mederer
told us nothing about that. My guess he assumed we knew
that. So did the Motec rep. If we had known that we
would have powered up the M800 months ago.

After you get power to the M800 you must load
the pertinent file into your Windows PC.

The attached spread sheet file contains  the wiring data.

A couple more days and we will be ready to run
the engine at low power. I will shoot a video and up load it to
You Tube.

Paul Lamar



Paul,  you make me feel normal. I usually blunder in to find the
instructions after.  Looks good and hope to hear the beast run.

Neil.


I am going to attempt to do a you tube video with a walk around
hangar tour comparing the TTC engine with a PT6 turbo prop
plane we have as an introduction.

And then  insert the TTC run up video segment.

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.