The PT6 gear box looks ideal for the wankel
as it has double reduction planet gears.
That means we can run higher than 7000 RPM
for more HP.
And it has a torque meter for reading out HP.
Paul Lamar
But a 15:1 reduction? How hard would it be to modify the reduction ratio?
Regards Rory Gold
Assume the reduction is in fact 15:1
Using it remains to be seen until we find out the reduction for each
stage.
One of the many possibility is one reduction is 3:1
and the other 5:1. That gives 15:1 over all.
If the first stage is 5:1 we would be in luck as we could remove just that
section. I'll try to figure it out be scaling this dwg.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove you. ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.