Subject: PT6 gear box for the Wankel
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 5/5/2016, 7:28 PM
To: A10-me-earthlink



 The PT6 gear box looks ideal for the wankel as it has double
 reduction planet gears.

 That means we can run higher than 7000 RPM for more HP.

 And it has  a torque meter for reading out HP.

 Paul Lamar

At 100% NG the 'engine' side is turning 33K-rpm (+), but being its a
free turbine, I've no idea what the power turbine is doing, I'd imagine
it's up there though. Safe to say input rpm into the box wouldn't be a
concern!

Jarrett

I scaled the box dwg based on the out side diameter of the one we have.

Removing the first stage and using only the second stage we would
have a 3:1 reduction similar to the Bell 47 final drive,
The ring gear would be about 9 inches in diameter and the sun
gear 4.5 inches in diameter.

The formula for the reduction ratio is the diameter of the ring
gear divided by the diameter of the sun gear plus one.

Here is the modified dwg.

Unfortunately we lose the torque meter.

It almost looks like they copied part of the Bell 47 gear box :-)

Paul Lamar

 The Rotary Engine free News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.