Subject: Best outfit to supply rotary reseal kits
From: paul lamar
Date: 5/16/2016, 11:13 PM
To: A10-Me-Earthlink


 Paul, I'm finally able to get to my engine rebuild project. Is
 "Atkins" or "Racing Beat" a good choice for buying all of the seals
 and "O-rings"? They both have about the same price point. I'm
 keeping it fairly stock so, no "P porting". Also I'm going to replace
 the exhaust system. I'm sure the "Cat" is original. Any suggestions
 on that end? I don't want to wake the neighbors when I'm coming and
 going. "91 RX-7 Convertible". I'll also be pulling the tranny, 1st &
 2nd syncros are almost useless and the input shaft bearing is noisy.


 Thomas Phy

I like Mazdatrix. IMHO the best.  Buy only Mazda seals.
Almost all after market  seals and iron seals are defective.
Inspect one with a microscope and you will see what I am talking
about.

Bite the bullet and put in Ianette ceramic seals and you won't have
to worry about a thing the rest of your life.  Regular iron seals
are picky about the oil supply. If it is an early RX8  engine it did not get
enough oil from the injection pump. Many early RX8 engines
failed for that reason. I mixed 1/2 ounce per gallon from day one
and I had no problems with my 2004 RX8.

http://www.rotaryeng.net/seals.html


Paul Lamar



The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.