How many people are actually working on rotary powered aircraft?
put the word PRIVATE
In the subject box and I will keep your info secret.
Paul Lamar
Hi Paul,
I'm still working on my Renesis powered Zenith 801. Remaining tasks
are to
fabricate the cowl, weld exhaust manifold and start engine
testing.Inline image 1
Kenny Aron
Looks like you are getting real close Kenny.
Best to drop the top of the rad down about 3 or 4 inches and put the
Kay's & London wedge diffuser on top of the rad between the rad and
the engine.
That will make sure the rad see's only cold air and will be
shielded from
the red hot exhaust. You could fly it with out the cowl to check
the cooling in
case you found some other things that need fixing.
We are going to fly the TTC with out a cowl. A cowl is a lot of
work :-)
Paul Lamar
But a cowl would reduce air drag.
Rolf Pfeiffer
Yes of course but most first flights are for discovering problems.
Every new installation has at least one it seems like.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you
want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.