Subject: Is this a viable rebuild candidate
From: paul lamar
Date: 5/19/2016, 12:49 PM
To: A10-Me-Earthlink



I found this advertised...


http://sacramento.craigslist.org/pts/5587654976.html


I know there is not much to go on, but would it be a good rebuild candidate? Or is it one that is best avoided?


Regards,

Brad Chubb


Looks like a real bargain. The trick to taking them apart is making sure the seals go
back in the slots they came out of. Make a box out of thin plywood with a bunch of separate compartments.
It will take some time but will pay off when it comes time to put it back together.

There are lots of books and video on how to over haul a rotary.
Once you do one you will be amazed how easy it is.

Also see if you can get the computer. The MAP sensor and temp sensors
are probably all ready still on the engine. They cost a lot if bought separately.

The engine will run with a different manifold using the stock injectors and sensors.

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.