Subject: How many people are actually working on rotary powered aircraft?
From: paul lamar
Date: 5/20/2016, 6:00 AM
To: A10-Me-Earthlink


           How many people are actually working on rotary powered aircraft?


           put the word PRIVATE
           In the subject box and I will keep your info secret.

           Paul Lamar



       I am still working on my Wheeler Express with a turbo p port 13b .
       Have a carb on it for now, have EFI built but still on my desk.
   Will run it this summer.

       Kevin Alderman

       That is interesting. What kind of carb Kevin?

       Paul Lamar



   Q200 with lightweight p port single rotor. Awaiting final inspection. ARF

   Lewis Bjork

   Great Lewis.  Thanks Lewis.  Lewis's one rotor engine is exhaust down.
   AKA plugs up.

   Lesson from the TTC engine.  If you install a Barnes type dry sump pump
   later on the
   oil tank can be raised to a more favorably position and the  oil pump
   will not
   have to draw oil up from about 10 inches below the pump as it is now.

   BTW Kevin is the motor mount done. I was thinking of exhaust down
   for a carb. Either a 500 CFM holly 2 barrel or 51 mm weber Chinese copy.

   Paul Lamar

Nebraska, mustang 2
I'm replacing a Lycoming 320 with a Mazda rx8 built by Tracy.
All together except finishing work on radiator and will hopefully be running
it on test stand this winter.


Jake Link



The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.