How many people are actually working on rotary powered
aircraft?
put the word PRIVATE
In the subject box and I will keep your info secret.
Paul Lamar
I am still working on my Wheeler Express with a turbo p port 13b .
Have a carb on it for now, have EFI built but still on my desk.
Will run it this summer.
Kevin Alderman
That is interesting. What kind of carb Kevin?
Paul Lamar
Q200 with lightweight p port single rotor. Awaiting final
inspection. ARF
Lewis Bjork
Great Lewis. Thanks Lewis. Lewis's one rotor engine is exhaust down.
AKA plugs up.
Lesson from the TTC engine. If you install a Barnes type dry sump pump
later on the
oil tank can be raised to a more favorably position and the oil pump
will not
have to draw oil up from about 10 inches below the pump as it is now.
BTW Kevin is the motor mount done. I was thinking of exhaust down
for a carb. Either a 500 CFM holly 2 barrel or 51 mm weber Chinese
copy.
Paul Lamar
Nebraska, mustang 2
I'm replacing a Lycoming 320 with a Mazda rx8 built by Tracy.
All together except finishing work on radiator and will hopefully be
running
it on test stand this winter.
Jake Link
Still working with Randy on a "P" port 13BREW/Mistral Backplate Hybrid
with Racing Beat middle and rear Aluminum side housings.....
Kelly Troyer
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net <http://www.rotaryeng.net/>You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.