Subject: How many people are actually working on rotary powered aircraft?
From: paul lamar
Date: 5/21/2016, 7:53 AM
To: A10-Me-Earthlink



How many people are actually working on rotary powered aircraft?


put the word PRIVATE In the subject box and I will keep your info
secret.

Paul Lamar

Andrew Campbell. New Zealand (Pioneer 300)

Are you in touch with Chris Hoskins in Tauranga?

He should be getting close to flying.

Paul Lamar

Hi, yes I know Chris but I'm not sure how far he is from flying.

Andrew Campbell


I used a Continental mount modified for the rotary, and its mounted
like it is in a car. The carb for testing is just a regular quadrajet
because I have one laying around. I made a plenum of sorts that
attached to the end of the runners to mount it on. As it is at the
moment, the carb is way too high for the cowling to even sit on the
plane. I want to do a bit of testing with the exhaust and turbo
before I close it up so much that changes require a lot of rework.

Kevin Alderman


Kevin, how does the P-port engine run with a single plenum/carb? Car guys seem to think they need individual throttles to idle properly but but an aero engine can idle a lot higher, maybe one of the big Rotec TBI's would work.

Everett Rankin

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.