Subject: How many people are actually working on rotary powered aircraft?
From: paul lamar
Date: 5/22/2016, 4:48 PM
To: A10-Me-Earthlink


    How many people are actually working on rotary powered aircraft?


    put the word PRIVATE In the subject box and I will keep your info
    secret.

    Paul Lamar

    Andrew Campbell. New Zealand (Pioneer 300)

    Are you in touch with Chris Hoskins in Tauranga?

    He should be getting close to flying.

    Paul Lamar

    Hi, yes I know Chris but I'm not sure how far he is from flying.

    Andrew Campbell


    I used a Continental mount modified for the rotary, and its mounted
    like it is in a car. The carb for testing is just a regular quadrajet
    because I have one laying around. I made a plenum of sorts that
    attached to the end of the runners to mount it on. As it is at the
    moment, the carb is way too high for the cowling to even sit on the
    plane. I want to do a bit of testing with the exhaust and turbo
    before I close it up so much that changes require a lot of rework.

    Kevin Alderman


   Kevin, how does the P-port engine run with a single plenum/carb? Car guys seem to think they need individual throttles to idle properly but but an aero engine can idle a lot higher, maybe one of the big Rotec TBI's would work.

   Everett Rankin


Dunno yet. Since all the incoming air will be mixed with fuel, any resonant pulses will still contain fuel. Tracys has fuel injection but a common plenum so the pulses will go from tube to tube just like the carb version would. I will let you know how it runs when I fire it up.

Kevin Alderman




    The Rotary Engine free News Letter. Powered by Linux. If you want off
    the list PLEASE let me know and I will remove you. ACRE NL web site.
    http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2016 All world wide rights reserved.