Subject: Visit with the OMC snowmobile rotary engine King.
From: paul lamar
Date: 5/26/2016, 6:18 AM
To: A10-Me-Earthlink




       Kevin Richey actually has 40 of these engines.


       In theory it is possible to convert them from charge cooled
       to oil cooled. I can show you how.

       Kevin is interested in selling a few. Kevin is in the Portland area.

       Paul Lamar

   I am definitely interested in buying a few more and I would like to change my mine from charge cooled to oil cooled so please show us how

   David Mikesell

   The hardest part is adding an oil seal to the rotor to keeping
   oil smoking down. It can be a spring loaded short steel cylinder.

   All roller bearings are replaced by oil feed plain beatings.

   The oil seal goes about where the red line is on this picture of the rotor
   on both sides. An oil squirter is added to the e-shaft and holes
   drilled to supply oil to the plain main and rotor bearings. A bushing is
   added to the rotor to accommodate a plain rotor bearing.

   Kevin email address is:

   Kevin Richey  <gyroKevin@gmail.com <mailto:gyroKevin@gmail.com>>

   Paul Lamar


Paul: Feel free to take OMC snowmobile service manual apart if it will make scanning the engine portion easier for you. I'm not interested in the rest of the manual anyway, so having the rotary engine portion of it scanned is a bonus. Thanks for volunteering to do the scanning! Also the specification page is, I believe, in the first part of the manual, that would give the engine specs.

Thanks, Kevin

Thanks Kevin. That will make it much easier.

Paul Lamar

       The Rotary Engine free News Letter. Powered by Linux. If you want off
       the list PLEASE let me know and I will remove  you.  ACRE NL web
       site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
       Copyright 1998-2016 All world wide rights reserved.